manualshive.com logo in svg

LG ARNU363DDA4, Installation Manual, Page: 20 / 60

Share
Download
LG ARNU363DDA4 Installation Manual Download Page 20

20

MUL

TI V Split Rooftop Unit Installation Manual

Due to our policy of continuous product innovation, some specifications may change without notification. 

 

©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.

Receiving

This product may have been subject to road salt during transit. If so, immediately wash off all visible white residue from all exterior surfaces. 

Upon receiving the product, check to ensure all line items are accounted for by referencing the delivery receipt or packing list.
Inspect each crate or carton for shipping damage before accepting delivery. 
Alert the carrier if any damage is detected. 

 Do not refuse shipment. The customer must make notation of damage (or shortage of items) 

on the delivery receipt and all copies of the bill of lading which should be countersigned by the delivering carrier. If damaged, immediately 

contact your manufacturer’s representative. Any physical damage to the unit after acceptance is not the responsibility of the manufacturer
Access door handles are locked with the bracket when shipped from factory.

Handling

Units are to be rigged and moved by the lifting or by the skid when a forklift is used. 

Handle the unit in such a manner as to keep from scratching or chipping the coating. Damaged finish may reduce ability of unit to resist 

corrosion.

INSTALLATION GUIDELINES

Figure 9: Split Rooftop Unit Forklift Guide

Summary of Contents for ARNU363DDA4





























































Reviews:

No comments