Installation
Installation
Indoor unit
Install the air conditioner in the location that satis-
fies the following conditions.
• The place shall easily bear a load exceeding
four times the indoor unit’s weight.
• The place shall be able to inspect the unit as the
figure.
• The place where the unit shall be leveled.
• The place shall easily connect with the outdoor
unit.
• The place where the unit is not affected by an
electrical noise.
• The place where air circulation in the room will
be good .
• There should not be any heat source or steam
near the unit
Confirm the positional relationship between the
unit and suspension bolts.
• Installation the ceiling opening to clean the filter
or service under the product.
Selection of the best location
Capacity(Btu/h) A B
7/9/12/15k 600 900
18/24k 600 1100
(Length: mm)
270 or more
520 or more
Inspection hole
(600 x 600)
Control box
600
600
A(Min)
B(Min)
Ceiling
Service Space
A
B
Built-in Duct type
• Refer to Suction grille and Suction canvas
installation manual for detail installation of
Built-in duct type
ENGLISH
Installation Manual
7
