Installation
16
Hydro Kit
Solar Thermal Kit
How to Install Solar Thermal Kit
Step 1.
Check the diameter of pre-installed pipes. (symbol
Ⓐ
and
Ⓑ
)
Step 2.
If the diameter of pre-installed pipes is different from diameter of solar thermal kit, it is
necessary to reduce or extend of pipeʼs diameter.
Step 3.
After Step 2., connect the pipe and solar thermal kit.
Step 4.
Connect solar thermal sensor to ʻCN_TH4ʼ(Red connector) of the Hydro Kit PCB.
If the water tank sensor is connected, disconnect the sensor from PCB first.
Solar
Thermal
System
(Field Supply)
Solar
Collector
(Field Supply)
Water Tank
Water Tank Sensor
(less than 5 meter)
Solar Thermal Sensor
(less than 5 meter)
Water In
Water Out
Water Out
Water
In
3way valve
(Field Supply)
Pump
(Field Supply)
