background image

32

DSP (Digital Sound Processor) mode

Press RECEIVER, and then press DSP repeatedly
to select the DSP (Digital Sound Processor) mode
you want.

The selected sound appears in the display window.

BYPASS mode

Press RECEIVER, and then press BYPASS
repeatedly to select 2 channel sound from front
speakers or subwoofer.

The selected sound appears in the display window.

ENHANCER mode

This mode enhances the sound quality of compressed
input signal (MP3, WMA, etc) from front speakers and
subwoofer.

Press RECEIVER, and then press ENHANCER
repeatedly to enhance the sound quality.

Display

CINEMA

BIG HALL

CLUB

JAZZ

ARENA

STADIUM

Description

Reproduces the powerful sound of
movie theater.

Reproduces the exciting sound of
movie concert halls.

Reproduces the normal music
sound.

Reproduces the acoustics of a jazz
club.

Reproduces the feeling of a sport
ground.

Reproduces the feeling of sports
open-air stadium.

Display

DSP BYPASS

STEREO

PURE BYPASS

Description

Reproduces the DSP bypass mode
with bass management from front
speakers and subwoofer.

Reproduces the 2 or 2.1 channel
bypass sound in multi channel from
front speakers and subwoofer.

Reproduces the pure bypass mode
with no bass management from front
speakers.

Display

VSM-3D

VSM-ES

MUSIC
ENHANCER

Description

Reproduces the 3D sound effect
when the input source is selected 2
or 2.1 channel.

Reproduces the 3D sound effect
when the input source is selected 5.1
channel or more.

Reproduces the compounded the
high-frequency. This mode has an
effect on the section of Bit rate and
Sampling frequency as shown below.
- Bit rate : 80-96Kbps
- Sampling frequency : 32 - 44.1 kHz

Summary of Contents for AR502PS









































Reviews: