PRODUCT INTRODUCTION
13
Remote control preparation
1
Use the screws to secure the holder to the
wall.
2
To insert the remote control to the holder.
-
Do not use rechargeable batteries such bat-
teries are different from standard dry cells in
shape, dimensions, and performance.
-
Change the batteries with a new one if the
remote control does not work properly after
using for an extended period of time.
1
Remove the cover from the back of the re-
mote controller.
-
Slide the cover according to the arrow di-
rection.
2
Insert two batteries.
-
Be sure that the (+) and (-) directions are
correct.
-
Be sure that both batteries are new.
3
Re-attach the cover.
-
Slide the cover into back position.
How to insert batteries
How to mount onto a wall
!
CAUTION
•
When not using remote controller for a
long time, flowing of dry cell liquid may
cause the failure of product, therefore,
remove all dry cells.
•
When replacing dry cell (AAA), replace
two of them all with new ones, and if re-
mote controller is not operated properly
even after replacing the dry cells (AAA),
request the service.
•
Do not disassemble or re-charge the
used dry cells, and do not throw away
those at the location with heat of fire or
hot air. There will be the danger of ex-
plosion.
EN
GL
IS
H
