background image

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

• 

Use two or more people to lift and transport the product. Avoid personal injury.

• 

Do not install the product where it will be exposed to sea wind (salt spray) directly. It may cause cor-
rosion on the product. Corrosion, particularly on the condenser and evaporator fins, could cause
product malfunction or inefficient operation.

Operation

• 

Do not expose the skin directly to cool air for long periods of time. (Don't sit in the draft.) This could
harm to your health.

• 

Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a con-
sumer air conditioner, not a precision refrigeration system. There is risk of damage or loss of prop-
erty.

• 

Do not block the inlet or outlet of air flow. It may cause product failure.

• 

Use a soft cloth to clean. Do not use harsh detergents, solvents, etc. There is risk of fire, electric
shock, or damage to the plastic parts of the product.

• 

Do not touch the metal parts of the product when removing the air filter. They are very sharp! There
is risk of personal injury.

• 

Do not step on or put anything on the product. (outdoor units) There is risk of personal injury and
failure of product.

• 

Always insert the filter securely. Clean the filter every two weeks or more often if necessary. A dirty
filter reduces the efficiency of the air conditioner and could cause product malfunction or damage.

• 

Do not insert hands or other objects through the air inlet or outlet while the product is in operation.
There are sharp and moving parts that could cause personal injury.

• 

Do not drink the water drained from the product. It is not sanitary and could cause serious health is-
sues.

• 

Use a firm stool or ladder when cleaning or maintaining the product. Be careful and avoid personal
injury.

• 

Replace all the batteries in the remote control with new ones of the same type. Do not mix old and
new batteries or different types of batteries. There is risk of fire or explosion 

• 

Do not recharge or disassemble the batteries. Do not dispose of batteries in the fire. They may burn
or explode.

• 

If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water. Do not
use the remote if the batteries have leaked. The chemicals in batteries could cause burns or other
health hazards.

• If you eat the liquid from the batteries, brush your teeth and see doctor. Do not use the remote if

the batteries have leaked. The chemicals in batteries could cause burns or other health hazards.

5

Summary of Contents for APNQ36GRA1
























Reviews: