LG APNQ36GRA1, Owner'S Manual

Page: 12 / 23

12
OPERATING INSTRUCTIONS
ENGLISH
Cooling Mode
1
Press
|
button to turn on the indoor.
2
Press
a
button to select Cooling opera-
tion mode.
- When canceling operating, press
|
but-
ton once more.
3
Adjust the desired temperature by press-
ing (
) buttons.
- If desired temperature is higher than
room temperature, cooling cannot be con-
ducted.
- Set the temperature lower than the room
temperature
- Setting Temp Range : 18 °C~30 °C.
Auto cleaning button
In the cooling and dehumidifying operations,
moisture is generated inside the indoor unit.
Use the auto cleaning function to remove
such moisture
1
Press
|
button to turn on the indoor.
2
Press button.
-
is displayed on the display screen.
- If you turn off the power, the fan
operates for 3 minutes and cleans the inside
of the indoor unit.
Airflow Setting
We can simply adjust the desired airflow di-
rection.
Up/Down Airflow Direction Control
1
Press
|
button to turn on the indoor.
2
Press
I
button and the louvers will swing
up and down.
3
Press
I
button again to set the horizontal
louver at the desired airflow direction.
Left/Right Airflow Direction Control
1
Press
|
button to turn on the indoor.
2
Press
J
button and the louvers will
swing left and right.
3
Press
J
button again to set the vertical
louver at the desired airflow direction.
<Airflow Setting Table>
Fan Speed Mode
1
Press
|
button to turn on the indoor.
2
Press button to select fan speed.
- You can select the fan speed in four
steps low, mid, high, super high. Each
time the button is pressed, the fan speed
mode is shifted
- Air flow rate can be selected during the
cooling, dehumidification, blowing, and
auto operation mode.
NOTE
!
What is 3 minutes delay function?
The reason that cold wind is not coming out
when operating the unit after turning off the
cooling is because of the function to protect
compressor. Cold wind will be coming out
when compressor is operated after 3 minutes.
NOTE
!
Some buttons cannot be used while the
auto cleaning function is in operation.
Symbol Description
I
Up·Down : Vane move from up to
down automatically and continu-
ously
J
Left·Right : Vane move from left to
right automatically and continuously
OPERATING INSTRUCTIONS