OPERATING INSTRUCTIONS
15
ENGLISH
Dehumidification Mode
In rainy season or high humidity climate, it is
possible to operate simultaneously dehumidi-
fier and cooling mode to remove humidity ef-
fectively.
1
Press
|
button to turn on the indoor.
2
Press
c
button to select dehumidification
mode
- Room temperature will be displayed after
desired temperature is indicated at dis-
play section for about 5 seconds.
Power Cooling/Heating Mode
Strong cooling/heating will be conducted in
short time.
1
Press
|
button to turn on the indoor.
2
Press
button to operate power cool-
ing/heating mode.
- When power (cooling/heating) button is
pressed during cooling/dehumidification
mode, power cooling will be operated.
In power cooling mode, desired tempera-
ture is set to 18°C and the horizontal lou-
ver is fixed at the highest position.
- When power (cooling/heating) button is
pressed during heating operation, power
heating will be operated.
In power heating mode, desired tempera-
ture is set to 30°C and the horizontal lou-
ver is fixed at the lowest position.
Fan Mode
1
Press
|
button to turn on the indoor.
2
Press
button to circulate indoor air.
- When canceling operation, press
|
but-
ton once more.
- During fan mode, outdoor fan and com-
pressor will not be operated.
Auto Operation Mode
1
Press
|
button to turn on the indoor.
2
Press
2
button to select Auto Operation
Mode.
3
Adjust the desired temperature by press-
ing (
) buttons.
- When room temperature is higher than
desired temperature, cooling operation
will be performed, and when it is lower,
heating operation will be conducted.
- The temperature established by customer
will be maintained through automatic per-
formance of cooling/heating operation in
accordance with the change of room tem-
perature.
Simple Reservation
Turning ON reservation mode
This function is able to turn on unit after a set-
ting time.
1
When the unit is turned off, adjust desired
setting time with button.
- Up to the maximum of 24 hours can be
selected.
Turning OFF reservation mode
This function is able to turn off unit after a set-
ting time.
1
When the unit is turned on, adjust desired
setting time with button.
- Up to the maximum of 7 hours can be se-
lected.
NOTE
!
After performing the setting, if corresponded
setting button is pressed once, remaining set-
ting time will be displayed, and if it is pressed
once again, corresponded setting function will
be cancelled. (same function as ) Remaining
setting time will be displayed with the unit of 1
hour.
1,MFL67870405,영영 17. 7. 16. 영영 1:54 Page 15
