Controller accessories
367
Wireless remote controller
Models : AHWRHS
Signal transmitter
Transmits the signals to the signal receptor.
1. FAN operation button
Used to circulate room air without cooling or heating.
2. Cooling operation button
3. Soft dry operation button
Used to dehumidify without overcooling.
4. Heating operation button
(Heat pump model only)
5. Timer set button
Used to set the timer when the desired time is obtained.
Then the wired remote controller is set up to 24 hours by
an hour but the wireless remote controller is set up to 7
hours by an hour. Therefore, if you want to set over 7
hours, use the wired remote controller.
6. Fan speed button
Used to set the desired fan speed.
7. On/Off button
Operation starts when this button is pressed, and stops
when the button is pressed again.
8. Set temperature button
Used to set the temperature when the desired tempera-
ture is obtained
9. Auto operation button
A/CL
7
9
2
8
5
6
4
1
3