INSTALLATION INSTRUCTION
ENGLISH
21
Installer Setting -Thermistor
This is the function to select the temperature sensor to judge the room temperature.
* As the characteristic of the ‘2TH’ function can be different in accordance with the products,
refer to the product instruction manual for its detail.
TEMP
FAN
SPEED
OPER
MODE
When pressing the button and
button simultaneously for more than 3
seconds, the system will be entered
into the installer setting mode.
- After entering into the installer setting
mode, select the thermistor sensor
setting code value by pressing the
button.
* Thermistor sensor selection code
value : 04
1
Select the desired setting value with the
temperature up(
▲
), down(
▼
) button.
2
When pressing the button,
currently established thermistor sensor
location will be set up.
3
When pressing the button and
button simultaneously for more than 3
seconds after the setting has been
completed, the setting mode will be
released.
- If there isn’t any button input for more
than 25 seconds, the installer setting
mode will also be released.
4
OPER
MODE
OPER
MODE
Code value
*Setting value
01: Remote
controller
02: Indoor unit
03: 2TH
OPER
MODE
Value
Summary of Contents for ABNW18GM1 Series
Page 28: ...28 ENGLISH ...
