LG A2UQ18GFA0, Owner'S Manual

Page: 12 / 23

12
OWNER'S INSTRUCTION
ENGLISH
Dehumidification Mode
1
. Press the ON/OFF button.
The unit will respond with beep sound.
2
. Press MODE button to select Dehumidifica-
tion Mode.
3
. Set the fan speed. You can select the fan
speed in four steps - low, medium, high, or
chaos. Each time the button is pressed, the
fan speed mode is shifted.
Fan Mode
1
. Press the ON/OFF button.
The unit will respond with beep sound.
2
. Press MODE button to select Fan Mode.
3
. Set the fan speed again. You can select the
fan speed in four steps–low, medium, high,
or chaos. Each time the button is pressed,
the fan speed mode is shifted.
Temperature Setting/Room
Temperature checking
During Dehumidification Mode
• If you select the dehumidification mode
on the operation selection button, the
indoor unit starts to run the dehumidifi-
cation function, automatically setting
the room temp. and air volume to the
best condition for dehumidification
based on the sensed room temp.
In this case, the setting temp. is not
displayed in the Remote Controller and
you are not able to control the room
temp. either.
• During the healthy dehumidification
function, the air volume is automatically
set according to the algorithm respond-
ing to the current room temp. and
makes the room condition healthy and
comfortable even in the high humidity
season.
Natural Wind by the chaos Logic
• For more fresh feeling than other fan
speed, press the Indoor Fan Speed Se-
lector and set to chaos mode. In this
mode, the wind blows like natural
breeze by automatically changing fan
speed according to the chaos logic.
During Fan Mode
• The outdoor compressor doesn't work.
Have a function to circulate the indoor
as it sends out the air that doesn't have
much temperature difference with in-
door.
We can simply adjust the desired tem-
perature
• Press the buttons to adjust the desired
temperature
: Increase 1˚C or 1˚F per one
time pressing
: Decrease 1˚C or 1˚F per one
time pressing
Room temp: Indicate the current room
temperature
Set temp: Indicate the temperature that
user want to set
<Cooling Mode>
The cooling mode doesn't work if desired
temperature is higher than room temper-
ature Please lower the desired tempera-
ture
Whenever press button, the room tem-
perature will be displayed within 5 sec-
onds.
After 5 seconds, it turns to display the
desired temperature.
Because of location of remote controller,
the real room temperature and the this
displayed value can be different.