background image

8

Room Air Conditioner

Safety Precautions

Do not recharge or
disassemble the batteries.
Do not dispose of batteries
in a fire.  

• They may burn or explode.

If the liquid from the
batteries gets onto your
skin or clothes, wash it well
with clean water. Do not use
the remote if the batteries
have leaked. 

• The chemicals in batteries could

cause
burns or
other health
hazards. 

If you eat the liquid from the
batteries, brush your teeth
and see doctor. Do not use
the remote if the batteries
have leaked.

• The chemicals in batteries could

cause burns or other health
hazards.

Always insert the filter
securely. Clean the filter
every two weeks or more
often if necessary. 

• A dirty filter reduces the

efficiency of the air conditioner
and could cause product
malfunction or
damage. 

Do not insert hands or other
objects through the air inlet
or outlet while the air
conditioner is plugged in.  

• There are sharp and moving

parts that could cause personal
injury.

Do not drink the water
drained from the unit. 

• It is not sanitary and could

cause serious health issues.

n

Disuse

Use a firm stool or ladder when cleaning or
maintaining the air conditioner.  

• Be careful and avoid

personal injury.

Replace the all batteries in the remote
control with new ones of the same type. Do
not mix old and new batteries or different
types of batteries.  

• There is risk of fire or explosion

For Heat & Cool model, heating operation range follows the below table.

* When the outdoor temperature drops below 0 °C, heating capacity may drop slightly depending on the

operation condition.

Heating

operation range

Outdoor temperature

0 ~ 24 °C

Operation ranges

Summary of Contents for A18LH1


































Reviews: