LG 86UH5C Service Manual Download Page 12

Page: 12 / 50

- 12 -

LGE Internal Use Only

Only for training and service purposes

5.1.3. Download method

1) Press Adj. key on the Adj. R/C,

2) Select EDID D/L (PCM) menu.

3) By pressing Enter key, EDID download will begin

4) If Download is successful, OK is display, but If Download is

failure, NG is displayed.

5) If Download is failure, Re-try downloads.

For Analog

EDID

For DVI EDID

For HDMI EDID

D-sub to D-

sub

DVI to DVI

DVI-D to HDMI

or HDMI to HDMI

* Caution) When EDID Download, must remove HDMI / D-sub

Cable.

5.1.4. RS232 IN / OUT INSPECTION

1) Connect RS232 In/Out cable with daisy chain.

* Use RS232C Direct Type Cable when connecting “RS232C

Out” for Inspection.

- Applied Model : 2015” Brand Signage Model features

RS232C In/Out Phone jack Type ( As of 2015)

- Phone to RS232C Gender(EAD62707902, Accessory Cable)

You can control several products at one time by connecting

them to a single PC.

2) Check the RS232 command.

i) RS232S Out Setting to PC

- Set device port “COM” ( check control panel on PC)

- Set Baud Rate “115200”

ii) Run RS232C Command program (ex. W/B adjust Program)

and Comm Test Program for RS232C Out Check.

iii) After Running Rs232C Command (ex. W/B adjust), Check

Data from RS232C out on Comm Test Program Window

5.1.5. EDID DATA

▪ Reference

- HDMI1 ~ HDMI3

- In the data of EDID, bellows may be different by Input mode

ⓐ

Product ID

ⓑ

Serial No: Controlled on production line.

ⓒ

Month, Year: Controlled on production line:

ex) Monthly : ‘01’ -> ‘01’

Year : ‘2015’ -> ‘19

ⓓ

Model Name(Hex): LGTV

ⓔ

Checksum(LG TV): Changeable by total EDID data.

ⓕ

Vendor Specific(HDMI)

* Checksum(HDMI1/HDMI2/HDMI3/OPS/DVI/Displayport)

Input

CheckSum

HDMI1

0x4A, 0x46(HDMI2.0)

0xDB, 0x2E(HDMI1.4)

HDMI2

0x49, 0x36(HDMI2.0)

0xDA, 0x1E(HDMI1.4)

HDMI3

0xD9,0x0E

OPS

0x69, 0x82

DVI

0x65

DisplayPort 0xBE, 0xD2

Summary of Contents for 86UH5C


















































Search results

Summary of Contents for 86UH5C

Reviews:

LG 86UH5C, Service Manual, Page: 12 / 50

Search results

Summary of Contents for 86UH5C

Reviews: