ENGLISH
30
1 Power (Command: k a)
►
To control power on or off of the set.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : [Off]
Data 01 : [On]
Ack
[a][ ][Set ID][ ][OK/NG][Data][x]
To show signage is power on or *Off
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Ack
[a][ ][Set ID][ ][OK/NG][Data][x]
* Similarly, if other functions transmit ‘FF’ data based
on this format, Acknowledgement feedback presents
status about each function.
* OK Ack., Error Ack. and other message may display on
the screen when signage is power on.
2 [Aspect Ratio] (Command: k c) (Main Picture Size)
►
To adjust the screen format. (Main picture format)
You can also adjust the screen format using the
picture settings.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 01 : [4:3] (Normal screen - Just Scan Off)
Data 02 : [16:9] (Wide screen - Just Scan Off)
Data 06 : [Original] (Just Scan Off)
Data 09 : [Just Scan
Ack
[c][ ][Set ID][ ][OK/NG][Data][x]
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In DTV/HDMI/Component mode (high-definition),
Just Scan is available.
* Full wide mode may work differently based on model
and is supported for DTV fully, and ATV, AV partially.
3 Screen Mute (Command: k d)
►
To select screen mute on/off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 00 : Screen mute off (Picture on) / Video mute off
Data 01 : Screen mute on (Picture off)
Data 10 : Video mute on
Ack
[d][ ][Set ID][ ][OK/NG][Data][x]
* In case of video mute on only, signage will display On
Screen Display(OSD). But, in case of Screen mute on,
signage will not display OSD.
4 Volume Mute (Command: k e)
►
To control volume mute on/off. You can also adjust
mute using the mute button on remote control.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Volume mute on (Volume off)
Data 01 : Volume mute off (Volume on)
Ack
[e][ ][Set ID][ ][OK/NG][Data][x]
5 Volume
Control (Command: k f)
►
To adjust volume. You can also adjust volume with
the volume buttons on remote control.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack
[f][ ][Set ID][ ][OK/NG][Data][x]
6 [Contrast] (Command: k g)
►
To adjust screen contrast. You can also adjust
contrast in the picture settings.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Ack
[g][ ][Set ID][ ][OK/NG][Data][x]
Summary of Contents for 60UL3E
Page 33: ......