ENGLISH
16
Clock Setup
Clock Source
•
You can select ‘Off’, ‘NTP’, ‘Admin’.
•
NTP : Clock is synchronized using Network Time Protocol. It's only enabled when network cable is connected.
•
Admin : It's automatically set to Admin when clock is updated by commercial protocols like TVLink-HCEC.
•
Off : Clock is synchronized using any available clock source.
-
Input
(Depending upon model)
» You can select 'Input' according to 'Clock Source'.
» Input is set to 'None', 'HCAP', 'Protocol', 'HTNG' automatically when Clock Source is 'Admin'.
Password Change
•
To ensure more security, Password can be changed by installers’ own design.
1
Change password by using virtual keyboard.
2
Input the password again for confirmation.
Lock Mode
•
If ‘Lock Mode’ is ‘Yes’, the following features will be unavailable.
USB
•
If it is set to ‘Enable’, USB devices do not work in relative features. (Exclude S/W update)
Factory Reset
•
If it is set to ‘Enable’, User Menu
General
Reset to Initial Settings
is disabled.
Crestron
(Depending upon model)
•
This function enables synchronization with applications provided by Crestron.
•
Server: This menu sets the server’s IP address for the network connection with the server. (equipment provided
by Crestron)
•
Port (1024~65535): This menu sets the port for the network connection with the server. The default port
number is 41794.
•
IP ID (3-254): This menu sets a unique ID for synchronizing with the application.
Summary of Contents for 60UL3E
Page 33: ......