- 14 -
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
O
DDC Adjustment Command Set
[
R/G/B GAIN max value : C0
9-4. Connecting Diagram of Equipment for
Measuring
(For Automatic Adjustment)
(method2, using RS-232C, You connect RS-232C Cable)
(1) Enter the adjustment mode of the white balance
- Enter the white balance adjustment mode at the same time
heat-run mode when pushing the power on by power only
key
- Maintain the white balance adjustment mode with same
condition of Heat-run
- Maintain after AC off/on in status of Heat-run pattern display
(2) Release the white balance adjustment mode
- Release the adjust mode after AC off/on or std-by off/on in
status of finishing the Hear-run mode
- push the “Tilt” key (RS-232C Mode) on Adjust remote-
controller.
- Release the Adjust mode when receiving the aging off
command(F3 00 00) from adjustment equipment)
(3) Enter the adjust mode of white balance
- you need push “tilt” key on Adjust remote-controller.
- Enter the white balance adjustment mode with aging
command(F3, 00, FF)
Adjustment
Adjustment
Adjustment
