LG 55LV770S, Owner'S Manual

Page: 102 / 132

102
ENG
ENGLISH
CUSTOMIZING SETTINGS
Setting Description
Real Cinema Makes video clips recorded in film look more natural by eliminating judder effect.
Uses this function when you watch film-originated movie contents.
This function can also work when TruMotion is off.
Colour Gamut Advanced Control
Maximizes the utilization of colour to increase colour quality.
»
Standard : Displays standard set of colours.
»
Wide : Increase number of colours used.
Expert Control
Displays colour domain of the signal.
»
Standard : Displays standard set of colours.
»
Wide : Increase number of colours used.
»
EBU : Mode to display EBU standard colour area.
»
SMPTE : Mode to display SMPTE standard colour area.
»
BT709 : Mode to display BT709 standard colour area.
Edge Enhancer Shows clearer and distinctive yet natural edges of the video.
This function works well over Sharpness UI 60 value.
xvYCC This feature is not available for all models.
This is produces richer colours.
This feature represents rich colours as much as a conventional video signal.
This function is enabled in “
Picture mode - Cinema, Expert ” when xvYCC signal is input-
ted through HDMI.
Colour Filter This is the function to filter the specific colours of the video.
You can use the RGB filter to set colour saturation and hue accurately.
Expert Pattern This is the pattern used for expert adjustment
This function is enabled in “
Picture Mode - Expert ” when you watch DTV.
Colour Temperature Adjusts the overall colour of the screen by changing the white baseline.
a. Gamma : Select 1.9, 2.2, 2.4
b. Method : 2 Points
y
Pattern: Inner, Outer
y
Red/Green/Blue Contrast, Red/Green/Blue Brightness : The adjustment range is -50 to
+50.
c. Method : 10 Point IRE
y
Pattern: Inner, Outer
y
IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and
can be set among 10, 20, 30 to 100. You can adjust Red, Green or Blue according to
each setting.
y
Luminance: This function displays calculated luminance value for 2.2 gamma. You can in-
put luminance value you want at 100 IRE, than the target luminance value for 2.2 gamma
is displayed at every 10 steps from 10 IRE to 90 IRE.
y
Red/Green/Blue: The adjustment range is -50 to +50.
d. Apply to all inputs
Colour Management
System As the tool used by the experts to make adjustments by using the test patterns, this does
not affect other colours but can be used to selectively adjust the 6 colour areas (Red/Green/
Blue/Cyan/Magenta/Yellow).
Colour difference may not be distinctive even when you make the adjustments for the gen-
eral video.
Adjusts Red/Green/Blue/Yellow/Cyan, Magenta.
»
d/Green/Blue/Yellow/Cyan, Magenta Colour: The adjustment range is -30 to +30.
»
Red/Green/Blue/Yellow/Cyan, Magenta Tint: The adjustment range is -30 to +30.
This feature is disabled in RGB-PC and HDMI-PC mode.