8
ENG
ENGLISH
SAFETY INSTRUCTIONS
Signal from Remote Control can be interrupted
due to external/internal lighting eg Sunlight,
fluorescent lighting. If this occurs turn off lighting or
darken viewing area.
When connecting external devices such as video
game consoles, make sure the connecting cables
are long enough. Otherwise, the product may
fall over, which may cause injury or damage the
product.
Do not turn the product On/Off by plugging-in or
unplugging the power plug to the wall outlet. (Do
not use the power plug for switch.) It may cause
mechanical failure or could give an electric shock.
Please follow the installation instructions below to
prevent the product from overheating.
•
The distance between the product and the wall
should be more than 10 cm.
•
Do not install the product in a place with
no ventilation (e.g., on a bookshelf or in a
cupboard).
•
Do not install the product on a carpet or
cushion.
•
Make sure the air vent is not blocked by a
tablecloth or curtain.
Otherwise, this may result in fire.
Take care not to touch the ventilation openings
when watching the TV for long periods as the
ventilation openings may become hot. This does
not affect the operation or performance of the
product.
Periodically examine the cord of your appliance, and
if its appearance indicates damage or deterioration,
unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part by
an authorized servicer.
Prevent dust collecting on the power plug pins or
outlet. This may cause a fire hazard.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular
attention to plugs, wall outlets, and the point where
the cord exits the appliance.
Do not press strongly upon the panel with a hand
or sharp object such as nail, pencil or pen, or make a
scratch on it, as it may cause damage to screen.
Avoid touching the screen or holding your finger(s)
against it for long periods of time. Doing so may
produce some temporary or permanent distortion/
damage to screen.
When cleaning the product and its components,
unplug the power first and wipe it with a soft cloth.
Applying excessive force may cause scratches or
discolouration. Do not spray with water or wipe with
a wet cloth. Never use glass cleaner, car or industrial
shiner, abrasives or wax, benzene, alcohol etc., which
can damage the product and its panel. Otherwise,
this may result in fire, electric shock or product
damage (deformation, corrosion or breakage).
Summary of Contents for 55EG910T.AMB
Page 41: ......
