- 4 -
LGE Internal Use Only
Copyright ©
LG Electronics. Inc. All rights reserved.
Only for training and service purposes
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This spec sheet is applied all of the 42” 50”, 60” PDP TV with PU41A chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
(1) Temperature: 25 °C ± 5 °C(77 °F ± 9 °F), CST: 40 °C ± 5 °C
(2) Relative Humidity: 65 % ± 10 %
(3) Power Voltage
: Standard input voltage (AC 100-240 V~, 50/60 Hz)
* Standard Voltage of each products is marked by models.
(4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with
BOM.
(5) The receiver must be operated for about 5 minutes prior to the adjustment.
3. Test method
(1) Performance: LGE TV test method followed
(2) Demanded other specification
- Safety : CE, IEC specification
- EMC : CE, IEC
4. Model General Specification
No
Item
Specification
Remark
1
Receiving System
1) ATSC / NTSC-M / 64&256 QAM
2
Available Channel
1) VHF : 02~13
2) UHF : 14~69
3) DTV : 02-69
4) CATV : 01~135
5) CADTV : 01~135
3
Input Voltage
1) AC 110 V, 60 Hz
N.America Mark : 110V, 60Hz
4
Market
NORTH AMERICA
5
Screen Size
50 inch Wide(1024 × 768)
50PB560B model
50 inch Wide(1920 × 1080)
50PB5600 model
60 inch Wide(1920 × 1080)
60PB5600 model
6
Aspect Ratio
16:9
7
Tuning System
FS
8
Module
PDP50T6#### (1024 × 768)
50PB560B model
PDP50R6#### (1920 × 1080)
50PB5600 model
PDP60R6#### (1920 × 1080)
60PB5600 model
9
Operating Environment
1) Temp : 0 ~ 40 deg
2) Humidity : ~ 80 %
10
Storage Environment
1) Temp : -20 ~ 60 deg
2) Humidity : ~ 85 %
Summary of Contents for 50PB560B
Page 19: ......
