background image

4

ENGLISH

If any of the following occur, unplug the product immediately and 
contact your local service centre.

•  The product has been impacted by shock
•  The product has been damaged
•  Foreign objects have entered the product
•  The product produced smoke or a strange smell

This may result in fire or electric shock.

Unplug the TV from AC mains wall socket if you do not intend to use the 
TV for a long period of time. Accumulated dust can cause fire hazard 
and insulation deterioration can cause electric leakage/shock/fire.

Apparatus shall not be exposed to dripping or splashing and no objects 
filled with liquids, such as vases, shall be placed on the apparatus.
Do not install this product on a wall if it could be exposed to oil or oil 
mist. This may damage the product and cause it to fall.

If water enters or comes into contact with TV, AC adapter or power 
cord please disconnect the power cord and contact service centre 
immediately. Otherwise, this may result in electric shock or fire.

Only use an authorized AC adapter and power cord approved by 
LG Electronics. Otherwise, this may result in fire, electric shock, 
malfunction or product deformation.

Never Disassemble the AC adapter or power cord. This may result in fire 
or electric shock.

 CAUTION

Install the product where no radio wave occurs.

There should be enough distance between an outside antenna and 
power lines to keep the former from touching the latter even when the 
antenna falls. This may cause an electric shock.

Do not install the product on places such as unstable shelves or inclined 
surfaces. Also avoid places where there is vibration or where the 
product cannot be fully supported. Otherwise, the product may fall or 
flip over, which may cause injury or damage to the product.

If you install the TV on a stand, you need to take actions to prevent the 
product from overturning. Otherwise, the product may fall over, which 
may cause injury.

If you intend to mount the product to a wall, attach VESA standard 
mounting interface (optional parts) to the back of the product. When 
you install the set to use the wall mounting bracket (optional parts), fix 
it carefully so as not to drop.

Only use the attachments / accessories specified by the manufacturer.

When installing the antenna, consult with a qualified service 
technician. If not installed by a qualified technician, this may create a 
fire hazard or an electric shock hazard.

Summary of Contents for 43LX761H-GA











































Reviews: