21
206-4340
Ez Download Utility
(Continued on next page)
The Ez Download utility, available from the TV Manager, enables you
to select multiple files at one
time from the files loaded on a USB memory device. You may use this utility to download
any one
or all of the following to a TV:
•
One Clone or FTG Configuration (.tlx) file
• One TV CPU software update
• One PTC software update
• One boot logo (splash screen) image
Before You Begin
• Ensure the USB device has been formatted with FAT format.
•
Software update and boot logo image files must be stored in a folder named “LG_DTV” in the
root directory of the USB memory device. Clone/Configuration (.tlx) files should simply be stored
in the root directory of the USB device.
• If the EZ-Manager Wizard appears on the screen when you turn ON the TV, you can use the
wizard’s “USB Configuration” option to access the Ez Download utility (see “TV Configuration
Options” and/or “USB Configuration” on pages
13 and 18, respectively, as necessary).
• If the TV is currently in Pass-through Mode and you intend to use the TV Zoning feature for
location-specific configuration purposes, make sure to set the appropriate TV Zone # in the TV
when directed to do so in the procedure below.
•
When creating files to be downloaded, avoid using special characters (?, &, @, etc.) in filenames.
• Refer to “Custom Master TV Setup” on pages 36 to 38 for information on creating a Clone (.tlx)
file, and/or
refer to “Creating an FTG Configuration File” on pages
creating an FTG Configuration (.tlx) file for FTG Mode via CPU configuration.
• See Reference section, “Downloading a Boot Logo Image using a USB Memory Device,” for boot
logo image guidelines.
• See Reference section, “Updating TV/PTC Software using a USB Memory Device,” for further
information on software updates.
Caution: Do not unplug the TV power cord or remove the USB memory device
during a data download, as doing so may cause the TV to malfunction or harm the
USB device, respectively.
Accessing and Using the Ez Download Utility
1. If it is not ON already, turn ON the TV.
2. The next step depends on whether the EZ-Manager Wizard appears on the screen when you
turn ON the TV:
• If the wizard is displayed, you can access the Ez Download utility via the wizard, as indicated
above (see “Before You Begin”). However, to continue with this procedure and access the Ez
Download utility from the TV menus, exit the EZ-Manager Wizard. Then, continue with step 3.
• If the wizard is not displayed, go directly to step 3.
