LG 43LT570H Commercial Mode Setup Manual Download Page 13

Page: 13 / 87

206-4340

EZ-Manager Wizard (Cont.)

(Continued from previous page)

EZ-Manager Wizard

Welcome to LG’s EZ-Manager Wizard

• Use the EZ-Manager Wizard to configure the TV for Pro:Centric operation

or to configure the TV using a USB memory device.

Select ‘Next’ to continue.

• If a Pro:Centric server will not be installed and/or you do not wish to use

the EZ-Manager Wizard

to configure this TV, you may exit the wizard.

Select ‘No Pro:Centric’ to disable the Pro:Centric feature of this TV, or

select ‘Exit’ to quit.

This setup wizard will start automatically in 10 seconds.

Exit

No Pro:Centric

Use the arrow keys on the Installer Remote to select the desired option in the Welcome screen:
• To proceed with the EZ-Manager Wizard, select/highlight

Next

, and then press

. Then,

continue to the “TV Configuration Options” section below.

• To exit the wizard, but retain the use of the Pro:Centric remote management feature on this TV

(i.e., Installer Menu item 119 DATA CHANNEL set to 255) in the future, select/highlight

Exit

, and

then press

. In the confirmation pop-up window, select

, and then press

once more on

the Installer Remote.

• If you do not intend to install a Pro:Centric server on this system and you do not wish to use the

wizard’s Zoning or USB configuration options, exit the wizard as follows: Select/highlight

Pro:Centric

, and then press

. This will disable the Pro:Centric feature of this TV (i.e., Installer

Menu item 119 DATA CHANNEL

will be set to 0). In the confirmation pop-up window, select

and then press

once more on the Installer Remote.

TV Configuration Options

In the TV Configuration Options screen, you can choose how to proceed with the configuration of this

TV (assuming you do not opt to exit the wizard, which you may also do at any time).

Note:

If you intend to use the Zoning feature on the TV for location-specific configuration

purposes, select the “Zone & Room Number” option from this screen and set the

appropriate TV Zone # in the TV BEFORE you continue with additional configuration.

EZ-Manager Wizard

Exit

TV Configuration Options

• To configure the TV for Pro:Centric operation, select ‘Next’.

• To set the optional Zoning feature, select ‘Zone & Room Number’.

• To configure the TV using a USB memory device, select ‘USB Configuration’.

USB Configuration

Zone & Room Number

This setup wizard will continue automatically in 60 seconds.

Note:

If there is no user action in this screen within one minute, the wizard will automatically

continue to the next configuration step.

(Continued on next page)

Summary of Contents for 43LT570H
























































































Search results

Summary of Contents for 43LT570H

Reviews:

Related manuals for 43LT570H

Brands by name

Popular brands

LG 43LT570H, Commercial Mode Setup Manual

Search results

Summary of Contents for 43LT570H

Reviews:

Related manuals for 43LT570H

Brands by name

Popular brands