45
206-4340
Cloud Configuration Tool Overview
As indicated in the introduction to this document, there are two separate and distinct methods for
configuring LT570H TVs for FTG Mode of operation: one method is to configure the TV CPU for FTG
Mode operation, while the other is to configure the TV EBL for FTG Mode operation. FROM A LOCAL
CONFIGURATION STANDPOINT, EACH OF THESE METHODS IS MUTUALLY EXCLUSIVE. IF THE
CPU IS IN FTG MODE, THE EBL CANNOT BE SWITCHED TO FTG MODE. LIKEWISE, IF THE EBL IS
IN FTG MODE, THE CPU CANNOT BE SWITCHED TO FTG MODE.
This section provides an overview of LG’s Cloud Configuration Tool web application, which is used for FTG
Mode via CPU configuration. For best results, it is recommended that you access the Cloud Configuration
Tool using one of the following web browsers: Google Chrome™ 51 or later or Mozilla Firefox
®
47 or later.
Creating an FTG Configuration File
The subsections below briefly describe how to use the Cloud Configuration Tool to create an FTG
Configuration (.tlx) file that can be used to configure the TV for FTG Mode via CPU.
The Cloud
Configuration Tool
provides options both for advanced and new users. If you are not familiar with the steps
to create an FTG Configuration file, you may choose a Wizard Setup that will guide you through the
process of creating a new file. Refer to the
Cloud Configuration Tool User Guide
for further information.
Note:
There is also an option to save (export) configuration from a TV, which may be desirable or required
if
you want to save customized TV setup menu settings to the FTG Configuration file and/or
if you do not
know the RF channels at the site. See “Exporting a Clone File” on pages 39 to 41 for further information.
Access the Cloud Configuration Tool and Select a Setup Option
1. Launch a web browser, and navigate to the following URL:
cct.procentric.tv
.
2. On the Welcome web page, make sure
North America
(default) is selected in the Select Your Region
field, and then click on the
SELECT
button at the right of the field.
3. Once you select your region, you can choose the desired setup option, depending on your familiarity
with the utilities and/or your file requirements:
(Continued on next page)
