Power On Status
•
Decide to select working status of TV Set when turn on main power.
•
You can set with
PWR
,
STD
,
LST
.
•
PWR
always make TV set On status when turn on main power .
•
STD
make Stand-by status when turn on main power.
•
LST
make TVSet work like previous power status. As same concept as Power Backup mode; If main power
were turned off in
Power On status
, TVSet would work in On status. If main power were turned off in Stand-
by status, TVSet would work in Stand-by status.
Volume (0 ≤ Min ≤ Start ≤ Max ≤ 100)
•
Decide to apply volume policy of
Start Volume
,
Maximum Volume
and
Minimum Volume
as
On
(Work) or
Off
(Do Not Work).
Start Volume
This entry sets the start volume level when is power on.
•
The level is specified as a number between minimum volume to maximum value.
(Min ≤ Start ≤ Max)
•
The default setting is
Off
(disabled).
•
When enabled, if the value is lower then the minimum specified in the minimum volume entry,
the minimum volume entry must be used.
•
When enabled, if the value is larger then the maximum specified in the maximum volume entry,
the maximum volume value must be used.
•
Access to a volume in
Timer Power On
of User Menu must be fixed to start volume when
HTNG
HotelMode
(
Enable
) and
Start Volume
(
Off,
0
~
100
) were set simultaneously.
Maximum Volume
This entry sets the
Maximum Volume
level the set.
•
The level is specified as a number between
Minimum Volume
to
100
. (Min ≤ Max ≤ 100)
•
If the command volume up to higher than maximum volume is received, that should be ignored.
•
The default value is
100
.
Minimum Volume
This entry sets the
Minimum Volume
level the set will produce.
•
The level is specified as a number between
0
to
Maximum Volume
. (0 ≤ Min ≤ Max)
•
If the command volume down to lower than minimum volume is received, that should be
ignored.
•
The default value is
0
.
5
ENGLISH
Summary of Contents for 43LT340H0SB
Page 48: ......
