LG 43LT340H0SB Page 12 Installation Manual Download

Page: 12 / 48

TV MANAGER

USB

Ez Download

is a function that enables users to download the desired items all at once, such as EPK (software

update file), TLL (See

Send to USB

descriptions for more information regarding file types), Logo Image, etc.

•

Splash images and EPK files should be copied into the folder named LG_DTV on the USB.

TLL files should be copied to the root folder of the USB.

•

Insert Image files shoud be copied into the folder named LG_DTV on the USB.

* Image shown may differ from your TV.

Plug USB memory card into the USB port of the TV.

Use the

button to select the

TV Manager

option and then press the OK button.

Use the

button to select the

USB

and

Ez Download

and press the OK button.

Select a list to download and press the OK button.

Select the EPK option (software update) and then use the two dots and three dots buttons to download

either SPI Boot or LG Boot Logo. If you checked the LG Boot Logo checkbox, then the Splash image, if

selected, will be unchecked. Also, if you select the LG Boot Logo and proceed with the download, the

existing Splash image will be deleted.

When you are finished with your selections, use the button to select Apply and then press OK.

Wait for the download to complete. When it is finished, your TV will be turned off.

NOTE

•

If the DZM file is still in the USB after the download is complete:

An Ez Download pop-up window will appear and list the file types, such as TLL, Logo Image, Background

Images, EPK or Micom with the previously downloaded lists checked automatically.

•

If the global TLL and model TLL files exist in the same USB root directory, then only the global TLL will be

shown. If the global TLL has been deleted, then the model TLL will be shown.

•

The download files may vary by model.

ENGLISH

Summary of Contents for 43LT340H0SB

















































Search results

Summary of Contents for 43LT340H0SB

Reviews:

Related manuals for 43LT340H0SB

Brands by name

Popular brands

LG 43LT340H0SB, Installation Manual

Search results

Summary of Contents for 43LT340H0SB

Reviews:

Related manuals for 43LT340H0SB

Brands by name

Popular brands