21
ENG
ENGLISH
ASSEMBLING AND PREPARING
Tidying cables
1 Install the Power Cord Holder and Power Cord. It will
help prevent the power cable from being removed by
accident.
2 Gather and bind the cables with the Cable Holder.
CAUTION
y
Do not move the TV by holding the cable holder
and power cord holder, as the cable holders may
break, and injuries and damage to the TV may
occur.
CAUTION
y
Disconnect the power first, and then move or
install the TV. Otherwise electric shock may occur.
y
If you install the TV on a ceiling or slanted wall, it
may fall and result in severe injury.
Use an authorised LG wall mount and contact the
local dealer or qualified personnel.
y
Do not over tighten the screws as this may cause
damage to the TV and void your warranty.
y
Use the screws and wall mounts that meet the
VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the manufacturer’s warranty.
NOTE
y
Use the screws that are listed on the VESA
standard screw specifications.
y
The wall mount kit includes an installation manual
and necessary parts.
y
The wall mount bracket is not provided. You can
obtain additional accessories from your local
dealer.
y
The length of screws may differ depending on the
wall mount. Make sure to use the proper length.
y
For more information, refer to the manual supplied
with the wall mount.
Cable holder
Power cord holder
(Only 42PH47**)
(Only 50PH47**, 50/60PH67**)
Power cord holder
Separate purchase(Wall Mounting Bracket)
Model
42/50PH47**
50/60PH67**
vESA (A x B)
400 x 400
Standard screw
M6
Number of screws
4
Wall mount bracket
PSW420BX
A
B
