LG 42PA4500-UF, Service Manual

Page: 10 / 48

- 10 -
LGE Internal Use Only Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
* 2D HD EDID data
- 2D FHD RGB EDID data [C/S : 7C]
- 2D FHD HDMI1 EDID data [C/S : 63, 76]
- 2D FHD HDMI2 EDID data [C/S : 63, 66]
- 2D FHD HDMI3 EDID data [C/S : 63, 56]
* Vender ID
* Checksum: Changeable by total EDID data.
4.7. Checking the EYE-Q Operation.
(1) Press the EYE Key on the adjustment remote controller.
(2) Check the Sensor DATA ( It must be under 10) and keep
the data longer than 1.5s
(3) Check ‘OK’
(Sensor DATA 0 ~ 4095, Power Saving Mode 0 ~ 12)
* IF you press IN-STAP Button, change Green Eye-check
OSD.
Input HEX
HDMI1 10
HDMI2 20
HDMI3 30
EDID C/S data 2D-FHD
HDMI RGB
check sum
(Hex)
Block 0 0x63 0x7C
Block 1 0x76(HDMI1)
0x66(HDMI2)
0x56(HDMI3)
EDID C/S data 2D-HD
HDMI RGB
check sum
(Hex)
Block 0 0x3F 0x58
Block 1 0xFC(HDMI1)
0xEC(HDMI2)
0xDC(HDMI3)
Green Eye-Check(Factory Mode)
Sensor Data 9
Power saving mode 1
OK