9
Set whether it is turned on by the set input source or by the last stored input source.
y
It is turned on by the Last Memory Input if the Input source is turned off.
y
It is turned on by the Last Pr. If the Input source is turned off and the last memory Input is the RF.
y
The available Input Source values should be rotated.
y
If both the Input source and the ‘On Time’ menu are set, the Input source takes the priority.
y
When the Input source is changed to the TV, Programme menu is available.
y
When the Input source is changed to the ATV, the Program No. is set to 0. (If the channel map structure
does not support this, it depends on model’s channel handling.
y
Access to an input source item and a channel in ‘On Timer’ menu must be disabled when Power On
Default is activated.
Select start channel number if Input source’s value is TV. (in case of ATV, it means physical channel
number.)
(8-1) Input Source
(8-2) Programme
The Power Management feature will turn off the television receiver if no input control command is received
from either the Local or IR Key within a selected hours.
y
Activity on either of these inputs shall restart the ‘Power Management’ timer and check key time interval
again.
y
This entry can be set to a value which is corresponding to the desired hours (1 to 7).
y
Default value is ‘Off(disabled)’.
y
TV should off and on after apply this setting.
It is a mode to set whether to update DTV channel information automatically or not.
y
When DTV Channel Update is set to ’Auto’, the function to update TV’s programme map according to
DTV channel’s stream information
y
DTV Channel Update is set to ‘Manual’, the function to keep TV’s channel map even though DTV
programme’s information is changed.
Set the input source or channel to display and. A/V settings when turn on power in AC Power On or Stand-
by status.
(6) Power Management
(7) DTV Programme Update
(8) Power On Default
Summary of Contents for 42LY540S.AEK
Page 34: ...34 ...
