34
ENG
ENGLISH
WATCHING TV
Cable DTV Setting
The range that a user can select from the Service
Operator menu differs depending on number of
Service Operator supported by each country, and
if number of supported Service Operator for each
country is 1, corresponding function becomes non-
activation.
1
Press
Home
to access the Home menu.
2
Press the Navigation buttons to scroll to
SETUP
and press
OK
.
3
Press the Navigation buttons to scroll to
SETUP
and press
OK
.
4
Press the Navigation buttons to scroll to
Cable
DTV Setting
and press
OK
.
5
Press the Navigation buttons to scroll to
Serv-
ice Operator
or
Channel Auto update
and
press
OK
.
6
Select your desired Source.
7
When you are finished, press
EXIT
.
When you return to the previous menu, press
BACK
.
Satellite DTV Setting
You can add or delete a satellite setting ID.
1
Press
Home
to access the Home menu.
2
Press the Navigation buttons to scroll to
SETUP
and press
OK
.
3
Press the Navigation buttons to scroll to
SETUP
and press
OK
.
4
Press the Navigation buttons to scroll to
Satel-
lite DTV Setting
and press
OK
.
5
Select your desired setting ID.
You can change the following settings for each
setting ID for your preferences.
(In Satellite, Antenna & Satellite, Cable & Satellite
mode only-Only Satellite models)
(In Cable, Cable & Satellite(-Only Satellite models)
mode only)
Option
Description
Satellite
Select your desired Satellite.
LNB
Frequency
Select one value
from Universal, 9750,
10600, 5150.
If you select
Universal
for LNB Frequency
which is 9750/10600(MHz),
22KHz Tone
is disabled.
If you cannot find the LNB frequency value
from the list, select
User
and manually
enter the frequency.
22KHz Tone
When using 22KHz Tone switch, select
A
or
B
. If you use 22KHz Tone,
Tone Burst
and
Motorized System
are disabled.
Tone Burst
When using Tone Burst switch, select
A
or
B
. If you use Tone Burst,
22KHz Tone
and
Motorized System
are disabled.
LNB Power
To enable the power supply for the LNB,
select
On
.
If you select
Off,
Motorized System
is
disabled.
DiSEqC
When using DiSEqC, select one option
from
DiSEqC A~D
. If you use DiSEqC,
Motorized System
is disabled.
Motorized
System
When using the motor, select
On
. To set
the antenna position, press
OK
button
and move the motor. If you use the motor,
22KHz Tone, Tone Burst
and
DiSEqC
are disabled.
NOTE
y
When
Channel Auto Update
is
On
, you can
update information for all the programmes
that can be updated, including the pro-
gramme currently being watched.
y
When
Channel Auto Update
is
Off
, you can
only update information for the programme
currently being watched.
y
You can not select the
Cable DTV Setting
when the service operator is set to "
Ziggo
".
Summary of Contents for 42LV55 Series
Page 3: ...3 ENG ENGLISH LICENSES ...
