LG 40LX770H Service Manual Download

Page: 9 / 53

- 9 -

LGE Internal Use Only

Only for training and service purposes

(2) Mexico models (15Y LCD TV + MAC + Wi ESN

Key + HDCP1.4 and HDCP2.0)

4.2.6. Inspection

- In INSTART menu, check these keys.

4.3. LAN Inspection

4.3.1. Equipment & Condition

▪ Each other connection to LAN Port of IP Hub and Jig

4.3.2. LAN inspection solution

▪ LAN Port connection with PCB

▪ Network setting at MENU Mode of TV (Installer Menu -> 119

-> 253 -> Menu)

▪ setting automatic IP

▪ Setting state confirmation

- If automatic setting is finished, you confirm IP and MAC

Address.

4.4. LAN PORT INSPECTION(PING TEST)

4.4.1. Equipment setting

(1) Play the LAN Port Test PROGRAM.

(2) Input IP set up for an inspection to Test Program.

*IP Number : 12.12.2.2

Connect SET → LAN port == PC → LAN Port

4.4.2. LAN PORT inspection(PING TEST)

(1) Play the LAN Port Test Program.

(2) Connect each other LAN Port Jack.

(3) Play Test (F9) button and confirm OK Message.

(4) Remove LAN cable.

4.5. Model name & Serial number Download

4.5.1. Model name & Serial number D/L

▪

Press "Power on" key of service remote control.

(Baud rate : 115200 bps)

▪

Connect RS-232C Signal to USB Cable to USB.

▪

Write Serial number by use USB port.

▪

Must check the serial number at Instart menu.

4.5.2. Method & notice

(1) Serial number D/L is using of scan equipment.

(2) Setting of scan equipment operated by Manufacturing

Technology Group.

(3) Serial number D/L must be conformed when it is produced

in production line, because serial number D/L is mandatory

by D-book 4.0.

* Manual Download (Model Name and Serial Number)

If the TV set is downloaded by OTA or service man, sometimes

model name or serial number is initialized.(Not always)

It is impossible to download by bar code scan, so It need

Manual download.

1) Press the "Instart" key of Adjustment remote control.

2) Go to the menu "16.Model Number D/L" like below photo.

3) Input the Factory model name or Serial number like photo.

4) Check the model name Instart menu. → Factory name

displayed.

5) Check the Diagnostics.(DTV country only) → Buyer model

displayed.

4.6. EDID Download

4.6.1 Overview

▪ It is a VESA regulation. A PC or a MNT will display an

optimal resolution through information sharing without any

necessity of user input. It is a realization of “Plug and Play”.

4.6.2 Equipment

▪ Since embedded EDID data is used, EDID download JIG,

HDMI cable and D-sub cable are not need.

▪ Adjust remocon

SET

Summary of Contents for 40LX770H






















































Search results

Summary of Contents for 40LX770H

Reviews:

Related manuals for 40LX770H

Brands by name

Popular brands

LG 40LX770H, Service Manual

Search results

Summary of Contents for 40LX770H

Reviews:

Related manuals for 40LX770H

Brands by name

Popular brands