LG 32SM5D-B User Manual Download Page 3

Page: 3 / 81

ENGLISH

-Web Login ..........................................................................36
-Content Manager ..........................................................36

[Player]
[Scheduler]
[Template]

-Group Manager 2.0 ......................................................43
-ScreenShare ......................................................................46

MANAGEMENT TOOLS .............. 47

-Control Manager ............................................................47
-Picture ID ............................................................................48

TOUCH ........................................ 49

-Touch Assistive Menu ..................................................49
-IDB (Interactive Digital Board)................................50

IR CODE ...................................... 51

CONTROLLING MULTIPLE

PRODUCTS .................................. 53

-Connecting cables .........................................................53
-Communication Parameter ......................................54
-Command Reference List ..........................................55
-Transmission/Reception Protocol .........................59

To obtain the source code under GPL, LGPL, MPL,

and other open source licenses, that is contained

in this product, please visit

http://opensource.lge.com

In addition to the source code, all referred license

terms, warranty disclaimers and copyright notices

are available for download.
LG Electronics will also provide open source code

to you on CD-ROM for a charge covering the

cost of performing such distribution (such as the

cost of media, shipping, and handling) upon email

request to

[email protected]

This offer is valid for a period of three years after

our last shipment of this product. This offer is

valid to anyone in receipt of this information.

Summary of Contents for 32SM5D-B


















































































Search results

Summary of Contents for 32SM5D-B

Reviews:

Related manuals for 32SM5D-B

Brands by name

Popular brands

LG 32SM5D-B, User Manual

Search results

Summary of Contents for 32SM5D-B

Reviews:

Related manuals for 32SM5D-B

Brands by name

Popular brands