manualshive.com logo in svg

LG 32SE3KE, Owner'S Manual, Page: 109 / 111

Share
Download
LG 32SE3KE Owner'S Manual Download Page 109

ENGLISH

59

85. Fail Over USB Input (Command: s n, 0a)

Selects a USB status for fail over.

Transmission

[s][n][ ][Set ID][ ][0a][ ][Data] [Cr]
Data 00: 

Off

 01: 

Picture

 02: 

Photos

Acknowledgment

[n][ ][Set ID][ ][OK/NG][0a][Data] [x]

86. Fan Failure Check (Command: d w)

Check the fan malfunction.

Transmission

[d][w][ ][Set ID][ ][Data][Cr]
Data  FF: Read status
Acknowledgment

[w][ ][Set ID][ ][OK/NG][Data][x]
Data  00: Fan failure

 

01: Fan normal

*  This feature may not be available for all models.

87. 

Network Setting

 (Command: s n, 80 or 81 or 82)

Configures network and DNS settings.

Transmission

[s][n][ ][Set ID][ ][Data1][ ][Data2][ ]

[Data3][ ][Data4][ ][Data5][Cr]
Data1  80:  Configures/views the temporary IP mode 

(Auto/Manual), subnet mask, and gateway.

 

81: Configures/views the temporary DNS address.

 

82:  Saves temporary settings and views 

information about the current network.

* If Data1 is 80,

Data2  00:   Auto

 

01:   Manual

 

FF:  Views the temporary IP mode (Auto/Manual), 

subnet mask, and gateway.

** If Data2 is 01 (Manual),

Data3:  Manual IP address

Data4:  Subnet mask address

Data5:  Gateway address

* If Data1 is 81,

Data2  DNS address

 

FF: Displays the temporary DNS address.

* If Data1 is 82,

Data2  80:  Applies the temporary IP mode (Auto/

Manual), subnet mask, and gateway.

 

81:  Applies the temporary DNS address

 

FF:  Information on the current network (IP, subnet 

gateway and DNS)

*** An example of settings,

1. Auto: sn 01 80 00

2. Manual:  sn 01 80 01 010177223241 255255254000 

010177222001(IP:10.177.223.241, subnet: 

255.255.254.0, gateway: 10.177.222.1)

3. Network read: sn 01 80 ff

4. DNS setting:  sn 01 81 156147035018 (DNS: 

156.147.35.18)

5. Applying the settings:  sn 01 82 80 (applies the saved 

IP mode (auto/manual), subnet 

mask, and gateway), sn 01 82 81 

(applies the saved DSN)

*  Each IP address contains 12 decimal digits.

Acknowledgment

[n][ ][Set ID][ ][OK/NG][Data1][Data][x]

*  This feature is available only for wired networks.

*  This feature may not be available for all models.

Summary of Contents for 32SE3KE
















































































































Reviews:

No comments