LG 32SE3KE, Owner'S Manual, Page: 101 / 111

ENGLISH
51
45. DPM Wake Up Control (Command: s n, 0b)
Sets the DPM deactivation Control mode.
Transmission
[s][n][ ][Set ID][ ][0b][ ][Data][Cr]
Data 00: Sets the clock mode
01: Sets the clock + data mode
* When the monitor is turned off, the power key works even in On (01)
mode.
Acknowledgment
[n][ ][Set ID][ ][OK/NG][0b][Data][x]
* This feature may not be available for all models.
46. Remote Control/ Local Key Operation Lock
(Command: k m)
Adjusts the remote control/local key (front) lock.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 00: Off (Lock Off)
01: On (Lock On)
Acknowledgment
[m][ ][Set ID][ ][OK/NG][Data][x]
* This feature may not be available for all models.
47. Power On Delay (Command: f h)
Sets the schedule delay for when the power turns on. (Unit:
seconds)
Transmission
[f][h][ ][Set ID][ ][Data][Cr]
Data 00-FA: Min 0- Max 250 (sec)
Acknowledgment
[h][ ][Set ID][ ][OK/NG][Data][x]
* The maximum value may differ depending on the model.
48. Fail Over Mode (Command: m i)
Sets an input mode for fail over.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data 00:
Off
01: Auto
02: User Setting
Acknowledgment
[i][ ][Set ID][ ][OK/NG][Data][x]
49. Fail Over Input Select (Command: m j)
Selects an input source for fail over. (This feature is only
available when Fail Over is set to Custom.)
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ][Data4]
… [ ][DataN][Cr]
Data 1-N (Input priority 1-N)
60: RGB
70: DVI-D
90: HDMI
C0: Display Port
91: HDMI2/SDI/OPS
Acknowledgment
[j][ ][SetID][ ][OK/NG][Data1][Data2][Data3][Data4]
…[DataN] [x]
* Some input signals may not be available for all models.
* The data number (N) may vary depending on the model. (The data
number depends on the number of supported input signals.)
50. Remote Control Key Lock (Command: t p)
Configures the settings of the product's remote control key.
Transmission
[t][p][ ][Set ID][ ][Data][Cr]
Data 00: Unlocks all keys
01: Locks all keys except Power key
02: Locks all keys
Acknowledgment
[p][ ][Set ID][ ][OK/NG][Data][x]
* This feature may not be available for all models.