34
ENG
ENGLISH
MAGIC REMOTE CONTROL FUNCTIONS
registering Magic remote Control
It is necessary to ‘pair’ (register) the magic
remote control to your TV before it will work.
How to register the Magic remote Control
BACK
HOME
P
MY APPS
1 To register automatically,
turn the TV on and press the
Wheel(OK)
button. When
registration is completed, the
completion message appears on
the screen.
2 If registration fails, turn the TV
off and back on, then press the
Wheel(OK)
button to complete
registration.
How to re-register the Magic remote Control
BACK
SMArT
1 Press and hold the
BACK
and
SMArT
buttons together
for 5 seconds to reset, then
register it by following “How
to register the Magic Remote
Control” above.
2 To re-register the Magic
Remote Control, press and
hold the
BACK
button for 5
seconds toward the TV. When
registration is completed, the
completion message appears
on the screen.
How to use Magic remote Control
1 If the pointer disappears,
move the Magic Remote
Control slightly to left
or right. Then, it will
automatically appear on the
screen.
»
If the pointer has not been
used for a certain period
of time, it will disappear.
2 You can move the pointer by
aiming the Pointer Receiver
of the Magic Remote Control
at your TV then move it left,
right, up or down.
»
If the pointer does not
work properly, leave the
Magic Remote Control for
10 seconds then use it
again.
1
If you press
Wheel(OK)
on the Magic
Remote Control, the following screen
appears. Shows information about the
current programme and screen.
2
You can select More Menu
.
More
Precautions to Take when using
the Magic remote Control
y
Use the Magic Remote Control within
the maximum communication distance
(10 m). Using the Magic Remote
Control beyond this distance, or with
an object obstructing it, may cause a
communication failure.
y
A communication failure may occur due
to nearby devices. Electrical devices such
as a microwave oven or wireless LAN
product may cause interference, as these
use the same bandwidth (2.4 GHz) as the
Magic Remote Control.
y
The Magic Remote Control may be
damaged or may malfunction if it is
dropped or receives a heavy impact.
y
Take care not to bump into nearby
furniture or other people when using the
Magic Remote Control.
y
Manufacturer and installer cannot provide
service related to human safety as the
applicable wireless device has possibility
of electric wave interference.
y
It is recommended that an Access Point
(AP) be located more than 1 m away from
the TV. If the AP is installed closer than
1 m, the Magic Remote Control may not
perform as expected due to frequency
interference.
