8
ENG
ENGLISH
Mounting on a wall
Install the monitor at least 10 cm away from the wall and leave
about 10 cm of space at each side of the monitor to ensure sufficient
ventilation. Detailed installation instructions can be obtained from
your local retail store. Alternatively, please refer to the manual for
how to install and set up a tilting wall mounting bracket.
10 cm
10 cm
10 cm
10 cm
To install the monitor to a wall, attach a wall mounting bracket
(optional) to the back of the monitor. Make sure that the wall
mounting bracket is securely fixed to the monitor and to the wall.
1
If you use screws longer than the standard length, it may
damage the inside of the product.
2
A non-VESA standard screw may damage the product and cause
the monitor to fall. LG Electronics is not liable for any accidents
relating to the use of non-standard screws.
Model
24MN49HM
28MN49HM
Wall Mount
(A x B) (mm)
A
B
75 x 75
100 x 100
Standard screw
M4 x L10
Number of screws
4
Wall mount bracket
(optional)
RW120
CAUTION
•
Disconnect the power cord first, and then move or install the
monitor. Otherwise electric shock may occur.
•
If you install the monitor on a ceiling or slanted wall, it may fall
and result in severe injury.
•
Use an authorized LG wall mount and contact the local dealer or
qualified personnel.
•
Do not over tighten the screws as this may cause damage to the
monitor and void your warranty.
•
Use the screws and wall mounts that meet the VESA standard. Any
damages or injuries by misuse or using an improper accessory are
not covered by the manufacturer’s warranty.
•
Screw length from outer surface of back cover should be under
8mm.
NOTE
•
Must use the enclosed screw in the box. (Depending on model)
•
Use the screws that are listed on the VESA standard screw
specifications.
•
The wall mount kit includes an installation manual and necessary
parts.
•
The wall mount bracket is not provided. You can obtain additional
accessories from your local dealer.
•
The length of screws may differ depending on the wall mount.
Make sure to use the proper length.
•
For more information, refer to the manual supplied with the wall
mount.
Wall mount Pad
Back Cover
Standard screw
: M4 x L10
Wall mount Pad
Back Cover
Max. 8 mm