11
ENG
ENGLISH
USING THE MONITOR SET
USING THE MONITOR SET
Connecting to a PC
y
y
Your Monitor set supports Plug & Play*.
*Plug & Play: A PC recognizes a connected
device that users connect to a PC and turn
on, without device configuration or user
intervention.
D-SUB connection
Transmits analog video from your PC to the
Monitor set. Connect the PC and the Monitor set
with the supplied D-sub 15 pin signal cable as
shown in the following illustrations.
y
y
Mac adapter
For Apple Macintosh use, a separate plug
adapter is needed to change the 15 pin
high density (3 row) D-SUB VGA connector
on the supplied cable to a 15 pin 2 row
connector.
y
y
When using a D-Sub signal input cable
connector for Macintosh
y
y
If you use HDMI PC, it can cause compatibility
problem.
NOTE
NOTE
y
y
When you want to use two PC in our Monitor,
please connect the signal cable(D-SUB/
HDMI) respectively in Monitor set.
y
y
If you turn the Monitor set on while it is cold,
the screen may flicker. This is normal.
y
y
Some red, green, or blue spots may appear
on the screen. This is normal.
NOTE
y
y
Connect the signal
input cable and tighten
it by turning the screws
clockwise.
y
y
Do not press the screen with your finger for
a long time as this may result in temporary
distortion on the screen.
y
y
Avoid displaying a fixed image on the
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
CAUTION
HDMI connection
Transmits the digital video and audio signals from
your PC to the Monitor set. Connect the PC and
the Monitor set with the HDMI cable as shown in
the following illustrations.
