LG 22LG3DDH Page 104 Owner'S Manual Download

Page: 104 / 148

206-4190

1. Upon launching, the Express Script Installer Menu Wizard prompts you

to select a menu mode. Use the Up/Down arrow keys on the Installer

Remote to select the appropriate option:
• Select/highlight

Express Script

in order to proceed with the Installer

Menu Wizard. Then, press

(Enter)

on the Installer Remote.

• Select/highlight

Exit

Express Script

to exit the Installer Menu Wizard.

Then, press

(Enter)

on the Installer Remote.

The remaining steps of this procedure describe the Express Script

Installer Menu Wizard. Use the Installer Remote to make selections and

complete each step. You can select the Back button, where available, to

check previous settings, as necessary.

Caution: If you opt to exit the Express Script Installer Menu

Wizard at any time while it is in progress, any settings made

will not be retained.

2. Use the Left/Right arrow keys to select the appropriate tuning band

(Cable Standard [default], Cable HRC, Cable IRC, or Air). When you have

made your selection, use the arrow keys to select

Next

, and then press

(Enter)

3. Use the Up/Down arrow keys to select the desired Aux input option.

(Note: If you simply select

Next

and press

(Enter)

in this step, default

values will be used.)
• To customize settings, select

Customize Inputs

and press

(Enter)

Aux input options are displayed in a pop-up window. Use the arrow

keys to select the input(s) you want to enable or disable. When you are

finished, press

MENU

to close the pop-up window. Then, continue with

step 4.

• To use default values, select

Use default values

and press

(Enter)

Then, continue with step 4.

4. If using the Zenith pillow speaker code (default), you can simply select

Next

and press

(Enter)

Otherwise, select the pillow speaker code field, and use the Left/Right

arrow keys to select the appropriate option. When you have made your

selection, use the arrow keys to select

Next

, and then press

(Enter)

Express Script Installer Menu Wizard

The Express Script Installer Menu Wizard guides you through the process of setting up the essential items for

most hospital TV viewing applications and is displayed each time the TV is turned ON, unless it previously has

been completed or exited.

Note:

If previously completed or exited, the Express Script Installer Menu Wizard also can be re-activated

from the Installer Menu—set Installer Menu item

117 FACT DEFAULT

001

to initiate the Express Script

Installer Menu Wizard. See the “Installer Menu” section of this document for further information.

Note:

If you plan to create a customized Master TV Setup using the procedure on pages 11 to 14, transfer

(Teach) a Master TV Setup to a Target TV, or configure a TV with an FTG device for FTG Mode of operation,

be sure to exit the Express Script in order to avoid setup conflicts that may cause the TV to malfunction.

Which menu mode will you be using?

Installer Menu Wizard

Select Menu Mode

PTC: V0.00.007 CPU: V03.30.00 ASIC: 20E7

Exit Express Script

Which tuning band would you like to use?

Installer Menu Wizard

Step 1. Tuning Band

Exit Express Script

Back

Exit Script

Cable Standard

PTC: V0.00.007 CPU: V03.30.00 ASIC: 20E7

►

Installer Menu Wizard

Exit Express Script

PTC: V0.00.007 CPU: V03.30.00 ASIC: 20E7

►

Which inputs will you be using?

Step 2. Aux Input

Customize Inputs.

Use default values.

Back

Up/Down/Left/Right arrow keys

Which brand pillow speaker code will you be using?

Installer Menu Wizard

Step 3. Pillow Speaker

Exit Express Script

Back

Exit Script

Zenith code

PTC: V0.00.007 CPU: V03.30.00 ASIC: 20E7

►

(Continued on next page)

Express Script

Summary of Contents for 22LG3DDH





















































































































































Search results

Summary of Contents for 22LG3DDH

Reviews:

Related manuals for 22LG3DDH

Brands by name

Popular brands

LG 22LG3DDH, Owner'S Manual

Search results

Summary of Contents for 22LG3DDH

Reviews:

Related manuals for 22LG3DDH

Brands by name

Popular brands