background image

ENGLISH

9

Using the joystick button 

(Image shown may differ from your TV.)
You can simply operate the TV functions, pressing or moving the joystick 
button up, down, left or right.

Joystick Button

Basic Functions  

Power On

When the TV is turned off, place your 
finger on the joystick button and 
press it once and release it. 

Power Off

When the TV is turned on, place your 
finger on the joystick button and 
press it once for a few seconds and 
release it. (However, if the Menu 
button is on the screen, pressing and 
holding the joystick button will let 
you exit the Menu.)

Volume 
Control

If you place your finger over the 
joystick button and move it left or 
right, you can adjust the volume level 
you want. 

Programmes 
Control

If you place your finger over the 
joystick button and move it up or 
down, you can scrolls through the 
saved programmes you want. 

Adjusting the Menu

When the TV is turned on, press the joystick button one time. You can 
adjust the Menu items moving the joystick button up, down, left or 
right.

 

Turns the power off. 
Clears on-screen displays and returns to TV viewing.
Changes the input source.
Accesses the main menu.

 NOTE

•  When your finger over the joystick button and push it to the up, 

down, left or right, be careful not to press the joystick button. If you 
press the joystick button first, you may not be able to adjust the 
volume level and saved programmes.

Mounting on a table

(Image shown may differ from your TV.)

1  Lift and tilt the TV into its upright position on a table.  

•  Leave a 10 cm (minimum) space from the wall for proper 

ventilation.

10 cm

10 cm

10 cm

10 cm

10 cm

2  Connect the power cord to a wall outlet.

 CAUTION

•  Do not place the TV near or on sources of heat, as this may result in 

fire or other damage.

Using the kensington security 

system 

(This feature is not available for all models.)

•  Image shown may differ from your TV.

The Kensington security system connector is located at the rear of the 
TV. For more information of installation and using, refer to the manual 
provided with the Kensington security system or visit 

http://www.

kensington.com

. Connect the Kensington security system cable between 

the TV and a table.

Summary of Contents for 22LF45 Series











































Reviews: