background image

ENGLISH

7

You may find different brightness and color of the panel depending on 
your viewing position(left/right/top/down).  
This phenomenon occurs due to the characteristic of the panel. It is not 
related with the product performance, and it is not malfunction.

Displaying a still image for a prolonged period of time may cause image 
sticking. Avoid displaying a fixed image on the TV screen for a long 
period of time.

Generated Sound 

“Cracking” noise: A cracking noise that occurs when watching or turning 
off the TV is generated by plastic thermal contraction due to tempera-
ture and humidity. This noise is common for products where thermal 
deformation is required. Electrical circuit humming/panel buzzing: 
A low level noise is generated from a high-speed switching circuit, 
which supplies a large amount of current to operate a product. It varies 
depending on the product.  
This generated sound does not affect the performance and reliability 
of the product.

Do not use high voltage electrical goods near the TV (e.g. electric 
mosquito-swatter). This may result in product malfunction. 

Preparing

 NOTE

•  Image shown may differ from your TV.
•  Your TV’s OSD (On Screen Display) may differ slightly from that 

shown in this manual.

•  The available menus and options may differ from the input source 

or product model that you are using.

•  New features may be added to this TV in the future.
•  The TV can be placed in standby mode in order to reduce the power 

consumption. And the TV should be turned off if it will not be 
watched for some time, as this will reduce energy consumption.

•  The energy consumed during use can be significantly reduced if the 

level of brightness of the picture is reduced, and this will reduce 
the overall running cost.

•  The items supplied with your product may vary depending on the 

model.

•  Product specifications or contents of this manual may be changed 

without prior notice due to upgrade of product functions.

•  For an optimal connection, HDMI cables and USB devices should 

have bezels less than 10 mm thick and 18 mm width. Use an 
extension cable that supports USB 2.0 if the USB cable or USB 
memory stick does not fit into your TV’s USB port. 

A

B

A

B

    

*A 

<

=

 10 mm

*B 

<

=

 18 mm

 

•  Use a certified cable with the HDMI logo attached. 
•  If you do not use a certified HDMI cable, the screen may not display 

or a connection error may occur. (Recommended HDMI Cable Types)

 

-

High-Speed HDMI

®

/

TM

 cable (3 m or less)

 

-

High-Speed HDMI

®

/

TM

 cable with Ethernet (3 m or less)

Summary of Contents for 22LF45 Series











































Reviews: