9
STAND INSTRUCTIONS
(For 26/32LD350, 32/37/42/47LD460, 32/37/42/47LD465)
ᯫ
Image shown may differ from your TV.
!
NOTE
►
When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2
Assemble the parts of the
STAND BODY
with the
STAND BASE
of the TV.
3
Assemble the TV as shown.
4
Install the 4 screws into the holes shown.
AC IN
CABLE MANAGEME
NT
AC IN
CABLE MANAGEMENT
INSTALLATION
STAND BASE
STAND BODY
M4 x 20
AC IN
CABLE MANAGEMENT
M4 x 20
AC IN
CABLE MANAGEM
ENT
AC IN
CABLE MANAGEMENT
DETACHMENT
AC IN
CABLE MANAGEMEN
T
PROTECTION COVER
After removing the stand, install the included
PROTECTION COVER
over the hole for the
stand.
Press the
PROTECTION COVER
into the TV until
you hear it click.
When installing the wall mounting bracket, use
the
PROTECTION COVER
.
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2
Remove the screws from the TV.
3
Detach the stand from TV.
