LG - Owner'S Manual Download Page 38

Page: 38 / 220

A-34

PREPARATION

FRONT PANEL CONTROLS

NOTE

►

TV can be placed in standby mode in order to reduce the power consumption. And TV should be

switched off using the power switch on the TV if it will not be watched for some time, as this will

reduce energy consumption.

►

The energy consumed during use can be significantly reduced if the level of brightness of the picture

is reduced, and this will reduce the overall running cost.

CAUTION

►

Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from frag-

ments of glass, or the TV may fall.

►

Do not drag the TV. The floor or the product may be damaged.

■

Image shown may differ from your TV.

SPEAKER

PROGRAMME

INPUT

VOLUME MENU

POWER

VOLUME

MENU POWER

PROGRAMME

INPUT

Only 19/22/26LE3***, 22/26LE5***

Remote Control Sensor

Power/Standby Indicator

•

Illuminates red in standby mode.

•

The LED is off while the TV remains on.

Power/Standby Indicator

Note: You can turn the

Power Indicator

or off in the

OPTION

menu.

Intelligent Sensor

Adjusts picture according to

the surrounding conditions.

Remote Control Sensor

Only 32/37/42/47/55LE5***

Touch Sensor

•

You can use the desired button

function by touching.

Ofrecido por www.electromanuales.com

Summary of Contents for -





























































































































































































































Search results

Summary of Contents for -

Reviews:

Brands by name

Popular brands

LG -, Owner'S Manual

Search results

Summary of Contents for -

Reviews:

Brands by name

Popular brands