LG SIGNATURE WTP20WX, Owner'S Manual

Page: 19 / 49

18
EN
Leveling the Appliance
If the floor is uneven, turn the adjustable feet as
required (Do not insert pieces of wood etc. under
the feet). Make sure that all four feet are stable
and resting on the floor and then check that the
appliance is perfectly level (Use a spirit level).
•
Once the appliance is level, tighten the lock
nuts up towards the base of the appliance. All
lock nuts must be tightened.
Raise Lower
Lock nut
Tighten all 4
lock nuts securely
Diagonal Check
•
When pushing down on the edges of the top
plate diagonally, the appliance should not move
up and down at all (check both directions). If
the appliance rocks when pushing the machine
top plate diagonally, adjust the necessary foot
or feet again.
WARNING
•
After stacking the Main Washer on to the Mini
Washer, use the leveling feet on Mini Washer
to level both. Main Washer´s leveling feet
should be already be firmly snug against the
Mini Washer and the locknuts turned counter-
clockwise to secure them.
NOTE
• Timber or suspended type flooring will
contribute to excessive vibration and
unbalance. Re enforcement or bracing of the
timber floor may need to be considered to stop
or reduce excessive noise and vibration.
Using Anti-Slip Sheets (Optional)
If you install the appliance on a slippery surface,
it may move because of excessive vibration.
Incorrect leveling may cause malfunction
through noise and vibration. If this occurs, install
the anti-slip sheets under the leveling feet and
adjust the level.
1
Clean the floor to attach the anti-slip sheets.
•
Use a dry rag to remove and clean foreign
objects and moisture. If moisture remains,
the anti-slip sheets may slip.
2
Adjust the level after placing the appliance in
the installation area.
3
Place the adhesive side of the anti-slip
sheets on the floor.
•
It is most effective to install the anti-slip
sheets under the front feet. If it is difficult to
place the pads under the front feet, place
them under the back feet.
This side up
Adhesive side
4
Ensure the appliance is level.
• Push or rock the top edges of the
appliance gently to make sure that the
appliance does not rock. If the appliance
rocks, level the appliance again.
NOTE
•
You can obtain anti-slip sheets from an LG
Service Centre or a Hardware store.