12
ENGLISH
Using the kensington
security system
(Only OLED65W9*)
The Kensington security system connector is
located at the rear of the Companion Box (AV
Box). For more information of installation and
using, refer to the manual provided with the
Kensington security system or visit
http://www.
kensington.com
.
Connections
Connect various external devices to the TV and
switch input modes to select an external device.
For more information of external device’s
connection, refer to the manual provided with
each device.
Antenna/Cable
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
•
Use a signal splitter to use more than 2 TVs.
•
If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
•
When drilling holes into the wall,
make sure you use a drill and drill
bit with the specified diameter.
Ensure that you also follow the
instructions regarding the depth of
the holes.
-
Otherwise, the product may be
installed incorrectly and cause
safety issues.
•
Wear safety gloves when installing
the product. Do not use your bare
hands.
-
Otherwise, it may cause personal
injury.
•
If some parts of the wall mount
do not touch the wall after it is
attached, use the double-sided tape
included in the accessory box to
stick the mount to the wall.
•
If some parts of the wall mount do
not touch the wall after using the
wall mounting screws for wood, use
the remaining screws.
•
Be sure to use only the exclusive
wall mounting screws provided as
accessories.
•
If you want to connect the TV Cable
is connected to the back panel
partition, please use the enclosed
Punching Guide.
