LG-Nortel iPECS LIP-8040L User Manual Download

Page: 44 / 68

LIP-8040L User Guide

Issue 1

38 August,

2008

5.5

Call Park: Placing a call on Hold to Page

A user may transfer an active CO/IP call to a special
holding location (Park Orbit), which can be accessed
easily from any station in the system. Typically, this
feature is used with

Paging

to notify the desired user of

a parked call.
Parked calls are subject to

Hold Recall

after the Call

Park timer.

5.6

Two-Way Record: Recording a call

You may record an active external conversation in your

Voice Mail Box

To park an active external call:

•

Press

TRANS

PGM

•

Dial the Park Orbit (601-610 for iPECS-100, or 601-619
for iPECS-300 & 600),

•

Return to idle.

To retrieve a parked call:

•

Lift the handset,

•

Dial the Park Orbit.

To activate Two-Way Record while on a CO/IP call:

•

Use the Navigation button to display the next Menu
and select the

Record

Soft button, record warning tone

is heard and recording starts.

To stop Two-Way Record while on a CO/IP call:

•

Use the Navigation button to display the next menu,
and select the

Record

Soft button or,

•

Hang-up, return to idle.

Summary of Contents for iPECS LIP-8040L





































































Search results

Summary of Contents for iPECS LIP-8040L

Reviews:

Related manuals for iPECS LIP-8040L

Brands by name

Popular brands

LG-Nortel iPECS LIP-8040L, User Manual

Search results

Summary of Contents for iPECS LIP-8040L

Reviews:

Related manuals for iPECS LIP-8040L

Brands by name

Popular brands