LG-Nortel iPecs LIP-8012D User Manual Download Page 56

Page: 56 / 69

LIP-8012D & LIP-8024D User Guide

Issue 1

August, 2008

NOTE

—

Contacts 3 & 4 are only available in the

iPECS -300 & 600.

8.8

Power Fail Transfer (PFT)

When AC power to the system fails, back-up operation
may be provided with back-up batteries or

Power Fail

Transfer (PFT)

. When battery back-up is provided the

station will operate normally. When

PFT

is implemented,

an SLT is connected to a CO line by the system. This
SLT can be used as any normal SLT, providing service
while power is out.

8.9

System Voice Memo

The integrated Voice Mail modules incorporate several

Voice Memos

to provide Station Users with general

information  such  as  station  number,  date,  time,  and
feature status.  Voice Memos are heard over the iPECS
Phone speaker and over the handset for SLTs.
For  the

Station Status Memo

, the following items are

reported:

ICM Signaling Mode (Handsfree/Tone/Privacy)
Station IP Address
Station Mac Address
Number of messages x (x: number of all

message waiting)

Wake-Up Time (hh:mm)
Do Not Disturb
Forwarded to station xxx
Forwarded to speed bin xxx
Queued CO/IP line xxx
Locked (Temporary COS)
COS x

Summary of Contents for iPecs LIP-8012D





































































Search results

Summary of Contents for iPecs LIP-8012D

Reviews:

Related manuals for iPecs LIP-8012D

Brands by name

Popular brands

LG-Nortel iPecs LIP-8012D, User Manual

Search results

Summary of Contents for iPecs LIP-8012D

Reviews:

Related manuals for iPecs LIP-8012D

Brands by name

Popular brands