manualshive.com logo in svg

LG Innotek RNRZ-B510A, Owner'S Manual

Share
Download
LG Innotek RNRZ-B510A Owner'S Manual Download Page 33

Operation

33

3

Oper

ation

Picture playback

Play the pictures of selected channel in [Picture] mode as shown in 
the figure below.

NOTE

•  When you select the play interval, it play the pictures 

automatically.

•  Click left and right sides of picture to display the previous or next 

picture.

External File Playback

The recording files stored in external storage connected to the USB 

port can be played in [External File] mode.
1.  Select [Main Menu] > [Playback] and select [External File] in the 

playback mode option as shown in the figure below. 

2.  Select a external storage in the [Device] option.
3.  Select [Refresh] and read the external storage mediums.

4.  Select a file to be played on the file browser.

5.  Click [Play] to start playback.

NOTE

Please make sure that the external starage is connected to the USB 

port of the system before the external file playback.

Playback by Log

Play the recording files corresponding to log information.

1.  Select [Main Menu] > [System Setting] > [Log Management] to 

enter the log management screen as shown in the figure below. 

2.  Set [Channel], [Type], [Start time] and [End Time] options and  

click [Search].

3.  Double click a log in the log list to enter the pop-up playback 

screen as shown in the figure below.

NOTE

•  Playback progress can be controlled by the playback time bar at 

the bottom.

•  The channel and time point corresponding to the selected log 

shall have recording files to play.

Summary of Contents for RNRZ-B510A



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands