LG-Ericsson WBR-3020 Page 69 User Manual Download

Page: 69 / 101

Wi-Fi Protected Setup (WPS)

WPS:

Check the box to enable the WPS feature.

WPS Button:

Check to Enable the WPS push button.

Wi-Fi Protected Setup Information

WPS Current Status:

Shows whether the WPS function is

Configured

Unconfigured

Configured means that WPS has been used to authorize connection

between the device and wireless clients.

SSID:

The SSID (name of the wireless network) used when connecting using

WPS.

Authentication

Mode:

The encryption method used by the WPS process.

Passphrase Key:

This is the passphrase key that is randomly generated during the

WPS process. It is required if wireless clients that do not support WPS

attempt to connect to the wireless network.

WPS Via Push

Button:

Click this button to initialize the WPS feature using the push button

method.

There are two methods to initialize the WPS feature:

WPS via Push Button (PBC)

and

WPS via Pin (PIN)

Summary of Contents for WBR-3020






































































































Search results

Summary of Contents for WBR-3020

Reviews:

Related manuals for WBR-3020

Brands by name

Popular brands

LG-Ericsson WBR-3020, User Manual

Search results

Summary of Contents for WBR-3020

Reviews:

Related manuals for WBR-3020

Brands by name

Popular brands