background image

LIP-8002E/2AE  Quick  Guide 

ST 

 
Important  Safety  information 

To  prevent  the  risk  of  harm  to  the  user  or  damage  to  equipment,  please  read  this  

information before installing or repairing the phone.  

1.  Only trained and qualified service personnel should install, replace or service the phone.  

2. 

Don’t  spill  liquid  (ex.  Water)  on  the  phone.  In  case  of  spill,  contact  your  service  

technician for assistance to avoid fire or electric shock.  

3.  If you see smoke or smell something burning, unplug the power cord and the phone line.  

Call your service technician for assistance.  

4. 

Don’t use the phone during a thunderstorm. Lightning strike may result in a fire, severe  

electrical or acoustic shock.  

5. 

Don’t tug the power cord or the phone line. This may result in a fire, an electric shock or  

equipment damage.  

6.  Ensure  that  children  do  not  pull  on  phone  cords.  This  may  injure  children  or  result  in  

equipment damage.  

7.  The  ear-piece  houses  a magnetic  device  which may  attract  pins or small metal objects. 

Keep handset clear of such objects and check before use. 

8.  Avoid placing the phone in an area that is dusty, damp or subject to vibration. 

9.  Choose a site that is dry and well ventilated.  

10. 

Don’t put the heavy things on the phone.  

11.  Do not drop or throw the phone.  

12.  Static electricity discharge will damage electronic components.  

13.  Keep out of direct sunlight and away from heat.  

14.  Clean  the  phone  with  a  soft,  dry  cloth  only.  Do  not  use  volatile  liquids  such  as  petrol,  

alcohol  or  acetone  as  this  may  cause  a  fire  or  result  in  discoloration  or  damage  to 

plastics. Do not clean with wax or silicon products as these may enter the equipment and  

cause operation to become unreliable.  

15.  No  user  serviceable  parts  inside.  Do  not  inset  a  screw  driver  or  any  metal  objects  into  

the phone. This may cause electric shock or damage the equipment and will render the  

warranty void. 

 

Copyright© 2011 LG-Ericsson Co., Ltd.  All Rights Reserved  

This  material  is  copyrighted  by  LG-Ericsson  Co.,  Ltd.  Any  unauthorized  reproductions,  use  or  

disclosure of this material, or any part thereof, is strictly prohibited and is a violation of Copyright  

Laws.  LG-Ericsson  reserves  the  right  to  make  changes  in  specifications  at  any  time  without  

notice.  The  information  furnished  by LG-Ericsson  in  this material  is  believed  to be  accurate and  

reliable, but is not warranted to be true in all cases.  

 
 

1

Summary of Contents for LIP-8002AE



















Reviews: