LIP-8002E/2AE Quick Guide
ST
Flex Button Program
•
Press the
TRANS/PGM
button.
•
Press the flexible button to be programmed.
•
Press
TRANS/PGM
button and User Program Code (refer to the following table).
•
Press the
HOLD/SAVE
button.
(iPECS-CM/MG)
1) To assign Fixed or Number
•
Press the
TRANS/PGM
button.
•
Press the flexible button to be programmed.
•
Press program type (1: Fixed button, 2: Number, 0: Delete).
•
Choose the desired fixed button type (PTT, REDIAL, MUTE, CONFERENCE, ..) with
volume up and down button if the program type is Fixed button, or
•
Enter Number to dial if the program type is Number.
•
Press the
HOLD/SAVE
button.
2) To assign User Program Code
•
Press the
TRANS/PGM
button
•
Press the flexible button to be programmed
•
Enter Program Mode Code and User Program Code (refer to the table)
•
Press the
HOLD/SAVE
button to save.
System User Program Codes (LIK)
Code
Function
Remark
10
Enblock Mode Dialing
11
Intercom Ring
Select Ring Tone 1-8
12
CO/IP Ring
Select Ring Tone 1-8
13
Intercom Answer Mode
Select ICM Signal mode, 1:HF, 2:Tone, 3:Privacy
14
Call Coverage Attribute Setting
1:ON/OFF, 2:Ring Delay (0-9)
15
Station Ring Download
Ring Tone 5-8
19
Ear & Mic. Headset
21
Knock Down STA COS
22
Restore Station COS
Requires Auth Code
23
Walking COS
Requires Auth Code
30
VM Mobile Notify
31
Station Wait Retrieve
32
CLI/IP Message Wait Retrieve
9
