LG-Ericsson iPECS ES-4526G, User Manual

Page: 943 / 1328

C
HAPTER
39
| VLAN Commands
Configuring Private VLANs
– 943 –
ES-4500G Series
promiscuous – This port type can communicate with all other
promiscuous ports in the same primary VLAN, as well as with all the
ports in the associated secondary VLANs.
D
EFAULT
S
ETTING
Normal VLAN
C
OMMAND
M
ODE
Interface Configuration (Ethernet, Port Channel)
C
OMMAND
U
SAGE
To assign a promiscuous port to a primary VLAN, use the switchport
private-vlan mapping command. To assign a host port to a community
VLAN, use the switchport private-vlan host-association command.
E
XAMPLE
Console(config)#interface ethernet 1/2
Console(config-if)#switchport mode private-vlan promiscuous
Console(config-if)#exit
Console(config)#interface ethernet 1/3
Console(config-if)#switchport mode private-vlan host
Console(config-if)#
switchport private-
vlan host-
association
Use this command to associate an interface with a secondary VLAN. Use
the no form to remove this association.
S
YNTAX
switchport private-vlan host-association secondary-vlan-id
no switchport private-vlan host-association
secondary-vlan-id - ID of secondary (i.e., community) VLAN.
(Range: 1-4093, no leading zeroes).
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Interface Configuration (Ethernet, Port Channel)
C
OMMAND
U
SAGE
All ports assigned to a secondary (i.e., community) VLAN can pass traffic
between group members, but must communicate with resources outside of
the group via promiscuous ports in the associated primary VLAN.
E
XAMPLE
Console(config)#interface ethernet 1/3
Console(config-if)#switchport private-vlan host-association 3
Console(config-if)#